Carpet gripper 30cm x 12 pieces set
Carpet gripper 30cm x 12 pieces set
Low stock
The tufting cloth can be attached by nailing it to the DIY tufting wooden frame.
Each piece will be cut to a length of 30cm and sent to you.
Please use according to the size of the frame.
Product Details
A pin is attached to one side of the wood and a nail is attached to the other side.
Pin length: 3mm
Thickness 6.4 x Width 25 x Length approx. 300mm
How to assemble
This item is recommended for those who want to make a tufting frame as easily as possible.
Use a hammer to drive the nail into the wood.
Please refer to " How to make a tufting frame " on our blog.
*If the length does not match, please use a saw to cut it.
*Make sure the red side is inside.
*Please attach it inside the frame.
*Please refer to the photo
Notes
Wear work gloves during installation and be careful with pins and nails.
Please use the included nails where there are insufficient nails.